Submersible Pump MCKarlen DSP20 portable Submersible Waste Water Pumps for both domestic and industrial applications, are enclosed unit with a pump and a motor. Due to this construction the waste water pump is suitable for submersible installation in pits
Features Submersible Pump MCKarlen DSP20
- The pump housing made from cast iron, and the stator housing is made of thick stainless steel 304.
- The unique impeller design prevents overload under severe operating conditions.
- Semi-open non-clog impellers prevent pump clog by foreign matter.
- Separated Chamber, to reduce the water impact to the double mechanical seal (For 3HP ~ over). The seal and flow channel separated to reduce negative pressure.
- 3 Bearing, good balance. 3 Oil Seals, The concavity design for the impeller inserts into the oil seal. This prevents sand from damaging the oil chamber.
Application
- Large quantities of drainage and surface water
- Domestic wastewater with discharge from toilets
- Waste water from commercial buildings without discharge from toilets
- Sludge-containing industrial wastewater
- Industrial process water
Technical Data
- Flow max 3000 l/m
- Head max 30 m
- Liquid temp. 0°C to +40°CAmbient temp. Max +40°C
- Solid pass max. 40 mm up to 65 mm
- Max. depth 7 m
- Material stainless steel 304 & Cast iron
TECHNICAL DATA DSP SERIES :
| Model | Output | Outlet | Pass Solid (mm) | Weight |
| DSP 20 | 2 HP 1.5 kW | 80 mm 3 inch | 40 | 37 kg |
| DSP 30 | 3 HP 2.2 kW | 80 mm 3 inch | 40 | 55 kg |
| DSP 50 | 5 HP 3.7 kW | 100 mm 4 inch | 45 | 57 kg |
| DSP 75 | 7.5 HP 5.5 kW | 100 mm 4 inch | 50 | 99 kg |
| DSP 100 | 10 HP 7.5 kW | 150 mm 6 inch | 65 | 109 kg |
| DSP 150 | 15 HP 11 kW | 150 mm 6 inch | 65 | 149 kg |
