Submersible Pump CALPEDA GXR11 Single impeller stainless steel submersible pump in chrome-nickel stainless steel, with vertical delivery port with open impeller. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber
Applications of Submersible Pump CALPEDA GXR11:
- Clean water with suspended solids up to a diameter of 10 mm
- Draining flooded rooms or tanks
- Extraction of water from ponds, streams or pits and for rainwater collection
Operating Conditions :
- Liquid temperature up to 50°C (40°C for GXR 12..).
- Maximum immersion depth: 5 m.
- Minimum water level with float: GXR = 70 mm, GXV = 130 mm.
- Minimum water level manual operation: GXR = 15 mm, GXV = 30 mm.
- Continuous duty.
Motor :
- 2-pole induction motor, 50 Hz (n ≈ 2900 rpm)
- three-phase
- 230 V ± 10%
- 400V ± 10%;
- Insulation class F.
- Protection IP X8 (for continuous immersion)
- Double impregnation humidity-proof dry winding.
- Constructed in accordance with EN 60034-1.
Special Features on Request :
- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- Other mechanical seal.
- Cable length 10 m (20 m for GXR 12..).
- Vertical magnetic float switch.
- Motor suitable for operation with frequency converter.
- Three-phase pumps with built-in switch and float.
Specification :
- Model : GXR 11
- Capacity : 9 m3/h
- Head : 5.3 meter
- Output : 1.25 inch
- Motor : 0.37 kW 0.5 Hp
- 3 phase
Supply for submersible pump, centrifugal pump, submersible sewage and drainage pump, fire fighting pump, booster pump, irrigation pump, mix volute pump, diaphragm metering pump for chemical, magnetic drive pump, feeder pump, gear pump, rotary pump, oil pump barrel hand pump, Oil pump, etc.
