Peripheral Pump Calpeda TP80E Peripheral close coupled electro pumps. This version with pump casing and lantern bracket in cast iron.
Application :
- Due to their compact dimensions, these pumps are highly suitable for installation in cooling and air-conditioning systems and equipment, as well as for circulation applications
- For clean liquids without abrasives, without suspended solids, non-explosive and non-aggressive for the pump materials.
- For increasing network pressure (follow local regulations).
Operating Conditions :
- Liquid temperature from -10 °C to +90 °C.
- Ambient temperature up to 40° C.
- Total suction lift up to 7 m.
- Maximum permissible pressure in the pump casing: 12.5 bar, (16 bar for TP series).
- Continuous duty.
Motor :
- 2-pole induction motor, 50 Hz (n ≈ 2900 rpm).
- three-phase
- 230/400 V ± 10%.
- 400/690 V ± 10%, from 4 to 7,5 kW
- Capacitor inside the terminal box.
- Insulation class F.
- Protection IP54
- IE2 efficiency class for single-phase motors.
- IE3 efficiency class for three-phase motors (IE2 up to 0,65 kW).
Special Features on Request :
- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- IP protection: IP55
- Special mechanical seal
- Higher or lower liquid or ambient temperatures.
- Construction with bearing bracket.
Specification of Peripheral Pump Calpeda TP80E :
- Model : TP 80E
- Capacity : 1 m3/h
- Head : 61 m
- Discharge : 0.75 inch (In/ out)
- Motor Power : 0.75 kW 1 HP
- 3 Phase
Supply for submersible pump, centrifugal pump, submersible sewage and drainage pump, fire fighting pump, booster pump, irrigation pump, mix volute pump, diaphragm metering pump for chemical, magnetic drive pump, feeder pump, gear pump, rotary pump, oil pump barrel hand pump, Oil pump, etc.
