CENTRIFUGAL PUMP CNP JET35 Stainless steel self priming centrifugal pump. CNP JET Series applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, non corrosive, non crystallizable, chemically neutral and close to water. Such as :
- Tank filling
- Domestic water supply
- Water transfer
- Pressure boosting
FEATURES :
- Self priming jest assisted centrifugal pump provides higher pressure and good suction alility.
- Pump body and impeller and so on made of stainless steel, ejector made of plastics with high intensity and abrasion proof.
- TEFC motor corrosion resistant and excludes dust and dirt. Protected against both high operating temperature and high current by a built-in automatically resetting thermal overload.
- Used screwed suction and discharge, quick and easy installation.
- Low maintenance, easy to service if required
TECHNICAL DATA CENTRIFUGAL PUMP CNP JET35 :
- Max. suction head : 7m
- Max. liquid temperature : +45 deg. C
- Max. ambient temperature : +40 deg. C
- Max. pump casing pressure : 0.6 MPa.
- Inlet size : G1
- Outlet size : G1
- Power : 0.55 kW
- Frequency : 50 Hz
- Voltage / Current :
Single phase : 220V / 3.86A
Three phase : 380V / 1.28V - Sped : 3450 r/min
- Protection class : IP55
MATERIAL :
- Casing : 304 SS
- Impeller : 304 SS
- Shaft : 304 SS
- Rotating : Ceramic
- Stationary : Carbon
- Venturi : PP + GF
- O-ring : NBR
- Motor house : Aluminum alloy
Performance Table :
- Driving motor : 0.55 kW
- Capacity :
- 0 m3/h ; Head : 33 m
- 0.6 m3/h ; Head : 28 m
- 1.2 m3/h ; Head : 23 m
- 1.5 m3/h ; Head : 21 m
- 1.8 m3/h ; Head : 20 m
- 2.4 m3/h ; Head : 18 m
